Remote access to LAN over CISCO 2600

[nebacar]

Our company has ISDN equipment connected to CISCO 2600 router for remote access to our LAN. ON CISCO 2600 IPSec is configured. Network address of our LAN is 192.168.188.0/24.

When client (Windows 2K professional) connect to LAN, it got IP address 192.168.189.x. but it can connect or ping only two servers on LAN!!! First is Windows NT4SP6 PDC and second is Windows NT4SP6 BDC.On both are WINS service are installed. IP addresses of servers are 192.168.188.40 and 192.168.188.41. Any other servers or clients on LAN are unreachably! Also from LAN only previous mentioned servers can ping remote client!
I looked at Router configuration but there are not any restrictions for accessing to LAN (ACLs)! What is a problem?
Can anybody help me? Thanks.

 

[Highland]

Is it a difference in the IP config on the servers, check the default gateway or if the servers that work have static routes to the remote LAN....???

 

[nebacar]

'You opened my eyes'! Only two servers has static route to remote lan. I added static routes on other servers and everything works. I forgot on static routes!!
Thanks!