Remote-Access Extension Question

[TelcoJohn]

System S8700 CM3.x

If I issue the change remote-access command and it says that is an invalid entry, does that mean the remote access has been permamnently diabled and I need to have Avaya enable it again. Is there a comannd to confirm that it is disbaled or is the fact it says the command is invalid proof enough of this?

Thanks

 

[AvayaTier3]

Avaya charges $ 600 to enable it
If it is not there, then it has been permanently disabled

change remote-access                                            Page   1 of   1
                                REMOTE ACCESS

      Remote Access Extension:             Barrier Code Length:
  Authorization Code Required? n

           Barrier                       Expiration   No. of    Calls
            Code      COR   TN    COS       Date      Calls     Used
        1:
        2:
        3:
        4:
        5:
        6:
        7:
        8:
        9:
       10:

 [b][highlight #CC0000]Permanently Disable? n[/highlight][/b] (NOTE: You must logoff to effect permanent disabling of Remote Access)

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[AvayaTier3]

status remote-access                                                       SPE B


               REMOTE ACCESS STATUS


      Remote Access Status: svn-disabled
      Remote Access Status: enabled
      Remote Access Status: not-administered

         Date/Time Modified: 12/02/05 08:09

    Barrier  Date      Expiration No. of Calls Status   Date/Time Expired Cause
    Code     Modified  Date       Calls  Used

 1: 1600160  12/03/04  12/04/04   10     10    expired  12/03/04 14:59    calls
 2: 1111     12/02/08  05/01/09   500    106   active     /  /     :

Ping me if you need help



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[TelcoJohn]

It looks like I will need Avaya to enable it then.

Thank you for your all your help.

 

[AvayaTier3]

I am not sure if they do this for non-maintenance customers any longer.

Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[BIS]

Off topic, but does anyone know how to go about getting remote access to an LSP site to test local dialing rules? Remote access does not appear to be related to tenant for example.

 

[AvayaTier3]

You should start a new thread. Your issue has a simple solution.


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
Avaya. Too little or no help? Expensive?
For FAST switch support at bargain rates, give bsh a call.

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]