Remote Access - Default COR w/ No Barrier Codes

[CChambleeJr]

I have a requirement to set up remote access, without the use of barrier codes. I need for the remote access caller to inherit a specific COR without using a barrier code. If this is not possible, then I'd like to know what COR that the remote access user inherits if a barrier code is not used.

Thanks in advance!

===
Chuck Chamblee
ACSS (CM) | CTP | A+ ce | Security+ ce

 

[joe2938]

no just change remote-access and set barrier code to none, but you leave yourself wide open for hackers, do not know how to do this through a cor

 

[montyzummer]

You could just leave the barrier code blank as said and use the cor you want or use telecommuter access

APSS (SME)
ACSS (SME)
ACIS (UC)

 

[CChambleeJr]

When you leave the barrier code off, you can't specify a COR... the fields aren't open to edit/set the COR unless you specify at least one barrier code.

===
Chuck Chamblee
ACSS (CM) | CTP | A+ ce | Security+ ce

 

[dialtonebone]

What are you ultimately trying to set up?

 

[CChambleeJr]

I don't think I explained my issue very well. I was trying to find out which COR was used by default when barrier code was set to "none". I finally found the answer. The default COR is "1". Thanks.

===
Chuck Chamblee
ACSS (CM) | CTP | A+ ce | Security+ ce