Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Release and type of CM

Status
Not open for further replies.

EdgarCasillas

Technical User
Jul 22, 2013
21
MX
Hi,

Anyone know where I can type CM that I have, for example whether a 5.x or 6.0 Aura?

Thanks
 
swversion from the linux CLI, or list conf soft if you're in the administration terminal. it might list as 15.xxx.yyy or 16.xxx.yyy and that's because the "CM" version was introduced at or about release 11 of the older software. Definity 12=CM2, etc
 
If you log into the PBX with ASA and type newterm it will give you the software load (but not the Service Pack information:

System: Extra Large Software Version:[highlight #FCE94F] R015x.02.1.016.4[/highlight]
Terminal Type (513, 715, 4410, 4425, VT220, NTT, W2KTT, SUNT): [513]

Kevin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top