Release 6.0 and adding a 3rd T1

[mcrackin]

I was reading the manual and it say that the 3rd T1 card in a maxi system goes into slot 7 or 8 of the combo card. My questions is, does it make a difference which combo it goes into? Or is it in the place where the Companion was into? I would assume it just opens up where the companion was in? What do you guys think?

Thanks in advance,

Richard S. McCranie
CoMatrix Southeast
richm@comatrix.com

 

[mroberts]

Huh?
We've have NOT yet found a problem with 6.1 and the third T-1. What we have found is that MR release 6.1 has a problem with NRU 10 and won't let you call into it using the browser and back up/restore tools. That's when we get MAP file errors.

MRoberts

http://www.a1teletronics.com

 

[jimhusted]

I'm confused...does the MR fix or cause the NRU problems?

 

[mroberts]

We found that MICSs with the MR release of 6.1 produces MAP file errors when using NRU 10 browser/backup restore tools.

When we replace the MICS MR 6.1 software with non-MR 6.1 software we were able to get into it just fine using NRU 10 browser/backup restore tools.

MRoberts

http://www.a1teletronics.com

 

[rhowlett]

6.1 MR was released to fix 3rd T1 problems. 6.1 MR requires new map files to work with NRU 10. So to sum up it fixes and causes problems

You can get the new map files and excel file from ITAS, if you ask for it. I have yet ot see it on Nortel for download.