REL1 ON CF AND REL2 ON HDU/1

[jazaya]

Hello,

i have a problem with using NIU2 compactflash and HDU7/1
at the same time as an external backup units.

i am trying the following procedure

physical connections:

NIU 2 is connected to HDU7/1 (with the cable TSR 901 0441/200)
to the slave(upper port) of the HDU7/1

and the switch on the HDU/1 is adjusted to cable selection
(1 off 2 off 3 on)

after these connections

BLEQI:EQU=1-0-60-00;

IOSII:NODE=SYSN,IODEV=FLASH,SUBFS=SYSSUBFS11,BTYPE=ATA;
IOSII:NODE=SYSN,IODEV=HDU7,SUBFS=SYSSUBFS21,BTYPE=ATA;

FICRI:SUBFS:SYSSUBFS11,SIZE=120;
FICRI:SUBFS:SYSSUBFS21,SIZE=120;

FIMOI:SUBFS=SYSSUBFS11;
FIMOI:SUBFS=SYSSUBFS21;

BLEQE:EQU=1-0-60-00,ALLFM=YES;

When i try to use this procedure

after sending

IOSII:NODE=SYSN,IODEV=HDU7,SUBFS=SYSSUBFS21,BTYPE=ATA;

it says NO DISC IS CONNECTED

HDU7/1 and CF are working standalone(as a master)....
but not together a MASTER/SLAVE


does anyone tried this or know the solution..
i am waiting for your helps.....

 

[SYAR2003]

It's not possible .
Both rels must be on master ATA disk (in this case the CF).
If CF card is used this is always tha master ata disk.

OR you can drop the CF and have 2 HDU7/1. .
One master ata disk and one slave .

The backup of slave disk is then utilized with FISBI .


Syar ..

 

[ceejay55]

Actuallly it works well on my test system BC12 AUTHORITY CLASS 7
(C) COPYRIGHT ERICSSON
BC12-TEST2 01APR04 12:22:24 1-0-60-01 SYSTERMINAL

<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER SanDisk IN SERVICE
SYSSUBFS11
TM-SF
SYSN SYSDISK2 001-0-60-0 SLAVE FUJITSU IN SERVICE
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN SYSTERM2 001-0-60-2 - MML - 7
SYSN SYSTERM3 001-0-60-3 - MML - 7
END

<FISCP:IODEV=SYSDISK1;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 122 MBYTES
SUBFS: SYSSUBFS11
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
51200 34568 12500 /SYSN/USR1
SUBFS: TM-SF
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
71680 71280 17500 /SYSN/USR1/ACS/TM
END

<FISCP:IODEV=SYSDISK2;
FILE SYSTEM CAPACITY DATA
TOTAL DISK SPACE: 19077 MBYTES
SUBFS: SYSSUBFS21
KBYTES FILES
TOTAL AVAIL TOTAL MOUNTED
256000 239376 62500 /SYSN/USR2
END

<DUBDP;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL1 REL2
11:58 01APR04 11:42 01APR04
LOCAL BACKUP
NO LIM WITH DIVERGENT TIME AND DATE

you may have to rfboi NIU2

also FISBI NOT supported NIU2 must FICPI

/*****************************************************************/
/* */
/* Initiation of Extra Backup Disk (ATA Disk or CompactFlash) */
/* */
/* !! NOTE : OLd Safety backup system is no longer valid !! */
/* !! (SAFETY-HDU, SAFETY-FS, FISBI) !! */
/* */
/* Extra backup is made by copying ordinary backup REL1/REL2 */
/* to the extra HDU/CF. */
/* */
/* */
/*****************************************************************/
IOBPI:NODE=BACKUP,BPOS=1-0-50;
IOSII:NODE=BACKUP,IODEV=BACKUP,SUBFS=SYSSUBFS31&SYSSUBFS41,BTYPE=ATA;
/* Create a new iodev on the sysn for slave ATA "safety" disk */
FICRI:SUBFS=SYSSUBFS31,SIZE=60;
Y;
FICRI:SUBFS=SYSSUBFS41,SIZE=60;
Y;
/* Mount the subfiles */
FIMOI:SUBFS=SYSSUBFS31,PATH=/BACKUP/USR3;
FIMOI:SUBFS=SYSSUBFS41,PATH=/BACKUP/USR4;
/* Create USR3/SES/DR */
FIDIIATH=/BACKUP/USR3/SES/;
FIDIIATH=/BACKUP/USR3/SES/DR;
/* Create USR4/SES/DR */
FIDIIATH=/BACKUP/USR4/SES/;
FIDIIATH=/BACKUP/USR4/SES/DR;
/* Make sure REL1 is the latest valid backup */
DUBDP;
@W
/* Copy REL1 to USR3 */
FICPI:SPATH=/SYSN/USR1/SES/DR,PATH=/BACKUP/USR3/SES/DR,COOP=DIR;
@W
/* Copy REL2 to USR4 */
FICPI:SPATH=/SYSN/USR2/SES/DR,PATH=/BACKUP/USR4/SES/DR,COOP=DIR;
/* Check USR3 & USR4 */
FIDAPATH=/BACKUP/USR3/SES/DR/*.*;
FIDAPATH=/BACKUP/USR4/SES/DR/*.*;
/*************************************************/
/** Cabling when the ATA disk is used as slave **/
/*************************************************/

ATA DISK AS SLAVE NIU WITH FLASH AS MASTER

XXXX XXXX
X X X X
X X X X
X X X X
X X X X
X X X X
X X X X
X--X CABLE TSR9010441 X--X
X X X X
X XXXXXXXXXXXXXX X X
X X X X X
XXXX X XXXX
X X X X X
X X XXXXXXXXXXXX X
X X X X
XXXX XXXX

/***************************************************/
/** Cabling when the ATA disk is used as fallback **/
/***************************************************/
/** THE CABLE HAS TO BE MOVED TO BE A "MASTER" **/
/** WHEN THE ATA DISK IS USED AS FALLBACK **/
/***************************************************/

ATA DISK AS FALLBACK NIU WITH "NO" FLASH
"MASTER"

XXXX XXXX
X X X X
X X X X
X X X X
X X X X
X X X X
X X X X
X--X CABLE TSR9010441 X--X
X X X X
X X X X
X X X X
XXXX XXXX
X X X X
X XXXXXXXXXXXXXXXXXXXXXXXXX X
X X X X
XXXX XXXX






 

[SYAR2003]

According to Ericsson FISBI shall be supported
if both disks is connected to one NIU2 (the SYSN).
(master and slave on same ata bus) .
Slave is defined as safety backup filesystem.

FICPI must be used copying REL's between disks on
separate NIU2 cards .(backup , this works fine)

AS for the splitting of REL1 and REL2
i wouldn't trust it unless it's documented .

..............

 

[MDsup]

Hello Jazaya,

Try strapping HDU7/1 CSEL selection on-off-on.


MDsup

 

[MDsup]

Sorry, my strapping is wrong!!!Should be (1 off 2 off 3 on)

I have done this in my lab-system this morning and it
works fine.
Maybe there is somthing wrong with the HDU7/1??

<BLEQI:EQU=1-0-60-0;
EXECUTED
<FIMOE:SUBFS=SYSSUBFS11;
EXECUTED
<fIMOE:SUBFS=SYSSUBFS21;
EXECUTED
<IOSIE:NODE=SYSN,IODEV=SYSDISK2;
EXECUTED
<IOSIE:NODE=SYSN,IODEV=SYSDISK1;
EXECUTED
<BLEQE:EQU=1-0-60-0,ALLFM=YES;
EXECUTED
<IOSII:NODE=SYSN,IODEV=SYSDISK1,BTYPE=ATA,SUBFS=SYSSUBFS11;
EXECUTED
<IOSII:NODE=SYSN,IODEV=SYSDISK2,BTYPE=ATA,SUBFS=SYSSUBFS21;
EXECUTED
<FICRI:SUBFS=SYSSUBFS11,SIZE=60;
SURE? (YES/NO)
<Y;
EXECUTED
<FICRI:SUBFS=SYSSUBFS21,SIZE=120;
SURE? (YES/NO)
<Y;
EXECUTED
<FIMOI:SUBFS=SYSSUBFS11,PATH=/SYSN/USR1;
EXECUTED
<FIMOI:SUBFS=SYSSUBFS21,PATH=/SYSN/USR2;
EXECUTED

<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER SanDisk IN SERVICE
SYSSUBFS11
SYSN SYSDISK2 001-0-60-0 SLAVE FUJITSU IN SERVICE
SYSSUBFS21
SYSN SYSTERMINAL 001-0-60-1 - MML - 7
SYSN APP 001-0-60-4 - NETWORK/OUT IN SERVICE
END



MDsup