Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ref: thread940-1756204 1608/16 Message Button Issue

Status
Not open for further replies.

P_Dam TelCom

IS-IT--Management
Feb 27, 2019
10
US
thread940-1756204

I am having what appears to be a similar problem with the Message Button failing to connect to the Voice Mail system on our 1608 and 1616 Avaya sets. Some work but many fail after apparently any interruption in connection of the phone to the switch. Removing and re-programming the extension(s) does not resolve the issue. In my case, pressing the Message Button on the 1608 or 1616 sets results in a single beep, but if I dial the Voice Mail (not Visual Voice, whatever that is) Hunt Group number I gain access as expected.

Running CM-6.0.07

Here are some rather basic questions I don't know the answer(s) to and other perhaps pertinent observations:
What is the 46xxsettings.txt file, where do I find it, and as an Admin is it normal to make adjustments in it?
The issue occurs whether using the handset or the speaker phone.
Seems to start on any given extension after either a power outage or some other restart of the phone (physical move, office re-arrangement, etc).
We upgraded/changed our Voice Mail system in early 2018 and this issue has only recently started to show up, so I don't think the problem is related to VM.
Voice Mail programming on any of the affected sets had not changed immediately prior to the problem arising, to the best of my knowledge.

Any assistance will be greatly appreciated, and please advise what if any further information I need to provide to help you help me!
Hopefully I have this post in the correct forum this time!!

Cheers,
Terry
 
On page 4, do you have anything in the following field:

voice-mail______________

If not, does putting the vmail number in there fix the problem?

-CL
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top