REDIRECTING SWITCH PROBLEM NOTIFICATION

[SBL110]

A few quick questions regarding remote notification.

I have a G3si running ver 12 software. We're currently using an Avaya BP for maintenance, but I want to turn off notification to them when there are alarms. It's a long story.

I'd like to re-direct the notification to myself regarding any problems so I can decide whether or not to bring in the BP.

I changed the phone number in System Maintenance, inserted the phone number to my direct dial desk phone and changed the notification level to "WARNINGS." I then busied out an IP phone (to create a Warning), but got no call. What did I miss? Also, could a pager number be used? What info. is transmitted?

Thanks in advance for any suggestions.

Scott

 

[h5n1]

warnings do not go out on inads....try to create a minor alarm for example....add an fake cabinet and ipsi to your system it'll alarm out....

 

[adaum]

A reset system 1 will send a warning out through INADS

 

[row1030]

You can configure your Avaya site administration to notify you via email on alarms.It must be running all of the time in order to get them.

 

[SBL110]

Thank you to everyone who responded. AS for Row1030's suggestion, I used to have an old laptop that ran ASA and would e-mail me with alerts, but it died recently. Time to find another almost dead system to press in to service. Thank you again.

Scott