Redial through Log and Phone manager Pro

[socalsteve]

406v2 4.0(10) VMpro w/ IMS, PRI, PMpro, 5420 and 5410 phones.



added a 9 in the PRI prefix setting so we can call local numbers through the log or PMpro but not long distnce because there is no 1. any work arounds for this?

 

[kwing112000]

try adding a 9 and 1 as the prefix

 

[h382]

91 in the prefix will work as long as your provider doesn't mind using 1 with non-long distance calls..

 

[Baumann1]

I did the 9 prefix, but because we don't do 10 digit dialing in this area, I was able to massage the shortcodes/ARS to add the 1 for LD and strip off the area code for local.

 

[socalsteve]

Baumann1 can you show me what these short codes look like?

 

[Baumann1]

Sure. This is a portion of the ARS entry from a 4.0.7 system.
Don't forget, I prefixed the line with a "9".

Code Number Feature Line Grp ID
715845N; 845N Dial 1
xxxxxxxxxx; 1N Dial 1

The first one is a local exchange and the second is LD. In a location with alot of local exchanges, this could be a sizable task, but luckily in this case, it wasn't all that bad.