(RED) EMER XFER ON

[mshadow]

HI

I have a question, about definity prologix tn2402 board.
In this moment the led (RED) EMER XFER ON,its red doesn't
off. I don't know what happened because I don't find errors
neither alarms, and save translation pass good.

if some body know the answer please help me.

thanks

regards

 

[troysp1]

You can try to use the set emergency transfer off or auto command on cabinet 1 of the PBX

Also check the physical status of the emergancy transfer panel on the switch itself

Status Health will show the status of emergancy transfer in each cabinet as well.

Hope this helps.

 

[mshadow]

Hi

after of move the switch auto or off and inspect if is there an emergency transfer panel then I doesn't found any thing; but I found one cable conected to AUX amphenol of the PBX. Then I disconnect it and the alarm went turned off.
Now the led (RED) EMER XFER ON is off

Thank you so much for you help

Regards and have a good day