Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recovery file for MFIM 300
- Thread starter Colbro1
- Start date
Sounds more like a TLS/security problem when the system starts and you can´t access the web interface.
When you have updated to a later 5.6, 6.0 or 6.1 the system uses in most countries TLS on port 443,
so try to deactivate TLS on the phone and set the port to 80.
After that restart the MFIM and try to access it again via http.
When you have updated to a later 5.6, 6.0 or 6.1 the system uses in most countries TLS on port 443,
so try to deactivate TLS on the phone and set the port to 80.
After that restart the MFIM and try to access it again via http.
- Thread starter
- #4
Not TLS problem,
It was being upgraded to 5.5 when could access upload of files and stupidly I defaulted system so now have no maintainence access to finish process.
Was hoping there were some recovery files to put it back to how it was, then start process again.
It was being upgraded to 5.5 when could access upload of files and stupidly I defaulted system so now have no maintainence access to finish process.
Was hoping there were some recovery files to put it back to how it was, then start process again.
- Thread starter
- #5
- Thread starter
- #7
- Thread starter
- #9
- Thread starter
- #10
- Thread starter
- #13
- Status