RECOVER PASSWORD HIPATH 4000 v4

[ErnaniMartins]

I FORGOT PASSWORD OR PUT WRONG AND NEEDED URGENT RECALL THE MASTER PASSWORD USER OR ANY USER BELOW AND MODIFY THE USER'S PERMISSION

DISPLAY-USER:;
DISPLAY-USER:;
H500: AMO USER STARTED
USER TABLE
+---+----------+----------------+----------+---------------+-------+-------+
|UID| NAME | AUTHORIZATIONS | STATUS | OPTIONS | RE- | LOCK- |
| | |111111 | | | | | | | | | | TRIES | TIME |
| | |5432109876543210| |L|R|C|F|P|E|T|I| | (MIN) |
+===+==========+================+==========+=+=+=+=+=+=+=+=+=======+=======+
| 1 | ATELECOM |.....XXXXXXXXXXX| |X X X X X X| 99 | 0 |
+---+----------+----------------+----------+---------------+-------+-------+
| 2 | SYSTEM |.....XXXXXXXXXXX| INIT. |X X X X X| 99 | 0 |
+---+----------+----------------+----------+---------------+-------+-------+
| 3 | ENGR1 |.....XXXXXXXXXXX| INIT. |X X X X | 99 | 0 |
t]+---+----------+----------------+----------+---------------+-------+-------+
| 4 | MASTER |...........XXXXX| INIT. |X X X X X X X| 10 | 10 |
+---+----------+----------------+----------+---------------+-------+-------+

 

[sbcsu]

Unless you have the USER file stored away you will not be able to recover the password.
As you are already logged on it seems, then you can ADD-USER and give it the same permissions as the current logon

 

[ErnaniMartins]

Only the user that use does not have permission to create user with greater privilege or change the permission

 

[sbcsu]

Yes that is correct.
Do you have any password for any account that has 0&&10 ?

You MIGHT be able to copy out the user file from another system and paste it on to the hard disk

 

[sbcsu]

Try
ACT-USER
For any of the ones with INIT next to them.
Not sure if it will work.

I used to copy out the PASSWORD file in AREA F from a hard drive that I was replacing and paste it back to the new hard drive then COPY-USER;

 

[ErnaniMartins]

Spoke of copies, I can not understand what to do. I have another central hipath4000 v1 this is the root user running. Its copy it and put the other? How I do? how do I get the file from one and put the other?

 

[sbcsu]

It has been a while - let me try it out here first and try and define the process.
I will come back to you later today.

 

[masviss]

Do you have possibility open Web Interface - Assistant?

 

[ErnaniMartins]

Masviss access to the web interface I have access to one. Already the other I no longer have the server stopped working. But in the meantime I can make the web interface?

 

[sbcsu]

As masviss says:
Open the HiPath Assistant
Go to Expert Mode/HiPath 4000 / Expert Access
Click on MML Dialog / Open on the left
From there you should be able to change user passwords or add a new user.

On All systems you should add your own Username/Password on both Comwin and Assistant to prevent getting locked out.