Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recommended Switch

Status
Not open for further replies.

ve3slw

Technical User
Dec 18, 2003
45
CA
Would a few of you recommend a reasonable priced switch for a new installation that will be utilizing 14 5610SW sets.
 
If you want a reasonable priced POE switch I would probably go with Linksys och HP.

Linksys is probably the best you can buy for that kind of money. (Remember that kind of money) :)

Just make sure the power in the switch is enough to power all you phones since the power output on different switches vary a lot.
 
Use a Cisco 3560 24p 10/100 POE its the best one for IP-Phone,s.
Also easy to progam and almost everybody here can help you with the configuration. (Programmed in 15s)

That will save you more money than the Switch!!!

Greets Peter

 
We have used Linksys and HP POE switches successfully, but had problems with 3com switches passing BOOTP / DHCP data after variable timeframes.

BEWARE that many IP phones use half the max power rating available, but that does NOT include the Avaya phones. With 14 IP hones you should just scrape in.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top