Recommendation on Netware Netshield settings

[ervsplace]

Was curious if anyone would share their Netshield settings for Netware? I have noticed that the cpu utilization is way up(70%)and sure it has to do with the way it is set up. It is not finding any virus but seems to be checking everything which is slowing traffic down.

Thanks
Dan

 

[Frustrated1]

Try to disable the outbound scan. We had a similar problem. We now only scan inbound traffic. We let the workstations scan from the server. Another thing that might be causing the problem is scanning all files. We found by configuring to scan only certain extensions also helped. These two items cut down on the high utilization. If this does not help there is also a Netware Tid# 10011512 that helps in troubleshooting high utilization problems on Netware servers.