Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Receiving dock one way phone
- Thread starter Eitsalo
- Start date
- Thread starter
- #2
BaseBall2000
Vendor
Set VG analog port as a PLAR...This will ring down to where ever you configure it to go
- Thread starter
- #4
- Thread starter
- #6
Call me a big D... but this procedure doesn’t' make sense.
Also this in 2005 and not sure what verion they were at.
Here it is:
"Put the phone in its own Partition, lets say Elevator-pt"
Do I create the Elevator-PT (partition)?
Next create a partition for which you want that phone to dial, lets say security, secringdwn-pt, for Security Ring Down Partition.
So here is another one partition?
Create a CSS with just one Partition in it that you want that ringdown to call, secringdwn-pt.
Put that CSS on the phones, device CSS or line CSS it doesn't matter
I am lost..
Go to translations create a new one but for the pattern put "absolutely nothing"
Here is another one.
for the CSS have it be for the internal number that you want to call.
Put in the called number translation to the number to what you want to call.
Where does the off-hook part setup?
Lost lost lost.. sorry. any help would be much appreciated.
Also this in 2005 and not sure what verion they were at.
Here it is:
"Put the phone in its own Partition, lets say Elevator-pt"
Do I create the Elevator-PT (partition)?
Next create a partition for which you want that phone to dial, lets say security, secringdwn-pt, for Security Ring Down Partition.
So here is another one partition?
Create a CSS with just one Partition in it that you want that ringdown to call, secringdwn-pt.
Put that CSS on the phones, device CSS or line CSS it doesn't matter
I am lost..
Go to translations create a new one but for the pattern put "absolutely nothing"
Here is another one.
for the CSS have it be for the internal number that you want to call.
Put in the called number translation to the number to what you want to call.
Where does the off-hook part setup?
Lost lost lost.. sorry. any help would be much appreciated.
Version doesn't matter. It's the same in all of them.
Yes create 2 new Partitions. Put the Phone ext. in one of them. Build a CSS with ONLY the second PT in it. Put the CSS on either the Device Configuration page or the Extension page or both, doesn't matter, on the Loading dock phone.
Create a Translation Pattern with nothing on the top and put it in the second PT, put on a CSS that can call your Reception desk and in the bottom of the TP for Called Party Transform Mask, put in your Reception ext.
When the loading dock phone is picked up it will automatically dial the number in the TP.
Yes create 2 new Partitions. Put the Phone ext. in one of them. Build a CSS with ONLY the second PT in it. Put the CSS on either the Device Configuration page or the Extension page or both, doesn't matter, on the Loading dock phone.
Create a Translation Pattern with nothing on the top and put it in the second PT, put on a CSS that can call your Reception desk and in the bottom of the TP for Called Party Transform Mask, put in your Reception ext.
When the loading dock phone is picked up it will automatically dial the number in the TP.
- Thread starter
- #8
- Status
Similar threads
- Locked
- Question
- Locked
- Question