Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rec'd #?

Status
Not open for further replies.
JosephBernard

JosephBernard

IS-IT--Management
Joined
Jan 24, 2005
Messages
33
Location
US
Is there a way to find out what numbers are being received for a certain DID number on a PRI? They don't seem to be 1 to 1 so I'm confused.
 
Sort by date Sort by votes
Dont exactly understand your question ...but

1. Check under recd # under target line in the Norstar
2. Call the phone company and ask

The number of digits will be the same for all DIDs on a Norstar
 
Upvote 0 Downvote
DCH ANALYZER

OLD ROLMEN WORKING ON NORTELS
 
Upvote 0 Downvote
Ok, I found out what the deal is. The installer changed it. He said the system can't accept a 0 or a 9 as the first digit. What I am taking about is that when you have a DID that is 555-7015 and the Rec'd# is set to 3 you'd expect to get 015, but he had it changed to 715.
 
Upvote 0 Downvote
I have set up a MICS with T1 DID first digit of 9, a few changes and it works fine.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dcommusa
  • Locked
  • Question Question
Line Settings-Rec'd #-4,5,8 can not program as 1st digit?
Replies
8
Views
250
RikRodgers
RikRodgers
ElecEng
  • Locked
  • Question Question
Unable to Assign DID Rec'd #
Replies
1
Views
98
ElecEng
ElecEng
curt2k
  • Locked
  • Question Question
t1 rec'd digits
Replies
5
Views
200
BagsNYC
BagsNYC
6453
  • Locked
  • Question Question
Analog DID Rec'd #
Replies
3
Views
145
6453
6453

Part and Inventory Search

Sponsor

Back
Top