We have a PowerEdge 2300 with PERC-2, running NT-4. One of the 4 drives in our RAID array went bad. When we go to the PERC BIOS to rebuild it, it says "rebuild in progress", yet it stalls there for more than an hour with nothing happening, no progress indicated. We could reformat it though. Another new drive also seemed to be unbuildable as well. We're wondering if there is a way to force the rebuild process. The server actually boots and works with 3 of the 4 drives.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rebuild not working
- Thread starter DavePL
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question