Rebooting when trying to delete TN 3

[drange]

Hello.

I have a TN that has caused me some trouble. It first started when I saw a ERR080 and noticed that the keys pressed where key 3 and 4 (several times).

I printed the TN (64 1 8 9) and only key 0 was programmed.

I tried to reprogram the keys without any luck. So I programmed the phone on a new TN and moved it, but when I try to delete the TN, the system reboots.

Any ideas?

 

[johnpoole]

post the tn. if it's not acquired it's corrupt..

john poole
bellsouth business
columbia,sc

 

[worldwidedialtone]

One other thing to try is disable the TN you are getting the ERR codes on. Then try deleting it.

 

[drange]

The TN's disabled.
[tt]
DES M3820
TN 064 1 08 09
TYPE 2616
CDEN 8D
CTYP XDLC
CUST 0
AOM 6
FDN 73703
TGAR 1
LDN NO
NCOS 2
SGRP 1
RNPG 60
SCI 0
SSU 0000
LNRS 16
XLST
SFLT NO
CAC_MFC 0
CLS TLD FBD WTA LPR PUA MTD FNA HTD ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD TENA SWD LNA CNDA
CFTA SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD MCTD CLBD AUTU
GPUA DPUA DNDA CFXA ARHD FITA CLTD ASCD
CPFA CPTA ABDD DELD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD
USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN
FDSD NOVD CDMR
CPND_LANG ROM
RCO 0
EFD 73703
HUNT
EHT
TEN 1
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 73725 0
DATE 5 DEC 2005[/tt]

 

[phonetek808]

If you have a vendor that maintains your system (or even ETAS), they can "uncorrupt" the TN most times by debugging it.

 

[drange]

Yes, I have a vendor, but that's boring. I want to learn about the system. How do I debug something like that? Do you think it's the card?

 

[Firebird Scrambler]

Can you "STAT" the TN 064 1 08 09 in LD 32?. Does it show "IDLE" "BUSY" "DSBL" or any other state?.
The TN can be remove via "pdt". This section is only meant to be accessed by people who know what they are doing.


All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.wanadoo-members.co.uk/firebird_scrambler

 

[HASAGO]

The best way to get rid of any form of corruption is to reload the PABX. When you say the PABX reboots I am assuming an INI is occuring rather than a reload? Can you actually out TN 064 1 08 09 ? If not what error do you get back? I have also had Nortel go into pdt and attempt to resolve corrupt TN's but the corruption came back again after a few months - a reload of the system fixed it for good.

 

[drange]

<tt>>ld32
NPR000
.stat 64 1 8 9
DSBL
.</tt>

Yes an INI is occuring. When I out it, I don't get any error messages as I can see. When using OTM it just loses the connection. I'm going to check using procomm now...

 

[phonetek808]

To debug you gotta go to a class or really know what you're doing, if you're having this much trbl with that TN, just ignore it and don't ever use it. Use a new TN. Hopefully it's not an Exec's phone or anything.

Can't hurt.

And for CPND or DES, type in BADTN so you remember not to use it.