HelpAtWork
Technical User
To disable, remove and re-seat an MC-32 card, do I just go to LD 32 and DISC 31 remove, insert and ENLC 31 ? (card is in slot 31)?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Re-seating MC-32
- Thread starter HelpAtWork
- Start date
- Status
Firebird Scrambler
Systems Engineer
That's about right. You can also use the command IDC 31 to check that you are working on the correct card slot as it will print out the card number and serial code.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
All the best
Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK
If it's working, then leave it alone!.
- Status
Similar threads
- Locked
- Question
- Question