After changing hard drives and re-installing Windows '98, I am unable to install/setup my modem. The modem is a generic 56K. When I start Windows and the plug 'N play process starts, everything works as it should until the last step. After Windows locates the driver and the "Update driver database" message displays, the computer reboots. When Windows restarts, the plug 'N play sequence starts all over again. If I cancel out and check out the device manager, the modem does not appear. I've also tried a different modem, but I get the same results. Before changing drives, the modem worked. What could be the problem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Re-installed Windows '98 and can't set up modem.
- Thread starter redwolfe
- Start date
VMPhilosophy
Technical User
I would disable plug and play, and find the correct drivers manufacturer. Sometimes windows generic drivers dont work right.
"Did you ever wish a circle was a square, so when land sharks start circling the boarders you can just cut them off at the corners?" - Aesop Rock
"Did you ever wish a circle was a square, so when land sharks start circling the boarders you can just cut them off at the corners?" - Aesop Rock
- Status
Similar threads