RE ENABLE PR I ?

[Toolhead2]

I found a 0x32 in our basement, with a PRI card installed. No one knows where it came from. My question is, it looks like its been powered down for at least a year or two. Do i need to reenable the PRI with codes ?

 

[ironhorse17]

Fire it up and see if you get a date and time different from Jan 01 and 12.00 if so it kept memory Norstars would not keep time and date on power down, they would resume on power up. I guess to let you know you had a power outage?

 

[hawks]

it might not have had a PRI in it that card is also used for a standard T1 application.

 

[exsmogger]

The only way to know for sure is to power it up and see if the DTI card is configured for a PRI.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[joelunchpail]

After you fire it up check the sys id and find someone to see if there are any key codes installed in KRS.
probably cheaper to recover than buy new ones.