Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
RCC install on win 11- reporting for contact centre
- Thread starter akak247
- Start date
Firebird Scrambler
Systems Engineer
Support for RCC expired many years ago.
If it was me, I would image the customers HDD so that you always have the original working system and with a new image, try to upgrade it to Windows 10 to see if it will work.
You might have to select the Windows compatibility mode for Windows 7, but there is no guarantee that it will work.
If it was me, I would image the customers HDD so that you always have the original working system and with a new image, try to upgrade it to Windows 10 to see if it will work.
You might have to select the Windows compatibility mode for Windows 7, but there is no guarantee that it will work.
curlycord
Programmer
You 2 yutes 4 years ago: https://www.tek-tips.com/threads/bcm-450-itel-rcc-software.1806864/
I recall it was a bitch from XP to 7....you say it does not work well with 10, so I will guess it will be the same on 11.
Maybe run a virtual mode of XP or 7?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question