RAS Question

[Go1dFinger]

Something strange is going on when I RAS into an S8700. I use to be able to RAS in with Login/ Password but now when I try to RAS I no longer get the standard Login I get "Enter Login Name". When I type in the normal login/ password I get disconnected.

Does anyone know why I am getting "Enter Login Name" instead of the standard Login?

Thanks for taking the time to view my thread.

 

[AvayaTier3]

someone stole the modem and put it on another system.
Get them to move the modem back to the s8700

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[Go1dFinger]

Thank you for the response, that is also what I beleive but I am being told by the onsite Tech that the Modem is plugged into the S8700.

I will send a Tech to investigate the issue.

Thanks again for the response. Cheers

 

[AvayaTier3]

This is a valid login prompt preceded by the s8700 server name. "login" is preceded by the linux kernel-release.

server1
2.6.11-AV31login: rasaccess
Password:


init@server1> uname -r
2.6.11-AV31

If your login prompt does not look like this, it is not an Avaya linux server.



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com