I have an MSI k8t Neo board running an AMD 64 3000+ processor which is fine. I downloaded CPU-z and I went over to the SPD table and checked my memory which is in slot #3. It says that I have PC3200(200 Mhz) RAM!!! It should read PC3200 (400 Mhz) to my knowledge because the FSB of my board is set to 200 Mhz and I think that DDR RAM runs at twice the FSB so the maximum my board can support is PC3200 DDR400, and nothing higher like PC3500. Is there something wrong that I am thinking about or is there something messed up with my timings or an option I have to change in the BIOS to get my memory to run at the correct speed. I don't know much about timings and stuff but they are currently 2.5-3-3-8. Any help is appreciated.