I have tried to setup a RAID array using 2 Quantum 6.4Gb drives on a Gigabyte 7DXR mboard. Each drive is set as master on it's own channel (cable)on the RAID connectors. I have changed the jumper on the board to RAID (JP54) and set boot options in BIOS to boot from RAID. According to the manual, when I first boot up I should get the FASTBUILD Bios screen to set up/configure the array. Nothing happens, it goes into normal boot mode and tells me there are no bootable devices. Have used BIOS ver F9 and F10a Beta. What am I doing wrong?? Any ideas please.