Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Radiant RJ-45 to RJ-11 adapter

Status
Not open for further replies.

RogueTech

IS-IT--Management
Jun 5, 2011
23
US
I am out of the factory Radiant RJ-45 to RJ-11 adapters for com ports 3-6. Does anyone have the sheet or the figure for making one. Thanks.
 
If you're talking about the cables needed to connect a receipt printer, I have a cable here that we use.

For clarification, the following pinouts are viewed with the cable in my hand, with the contacts facing the ceiling (up) and also facing myself. The plastic clip is facing away.

The RJ45 end looks to be using the standard T658B wiring schematic. Reading from left to right, the wires on the RJ45 end are:

Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown

With that same orientation (contacts facing up and towards me, clip facing away), here are the RJ11 contacts.

Orange/White
Blue
Green/White
Orange
Blue/White
Brown

Good luck!
 
Biggby,
You're my hero, cables worked great. Got the additional printer up and running. Thanks alot.

-RT
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top