Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Radiant RJ-45 to RJ-11 adapter
- Thread starter RogueTech
- Start date
BIGGBYNinja
IS-IT--Management
If you're talking about the cables needed to connect a receipt printer, I have a cable here that we use.
For clarification, the following pinouts are viewed with the cable in my hand, with the contacts facing the ceiling (up) and also facing myself. The plastic clip is facing away.
The RJ45 end looks to be using the standard T658B wiring schematic. Reading from left to right, the wires on the RJ45 end are:
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
With that same orientation (contacts facing up and towards me, clip facing away), here are the RJ11 contacts.
Orange/White
Blue
Green/White
Orange
Blue/White
Brown
Good luck!
For clarification, the following pinouts are viewed with the cable in my hand, with the contacts facing the ceiling (up) and also facing myself. The plastic clip is facing away.
The RJ45 end looks to be using the standard T658B wiring schematic. Reading from left to right, the wires on the RJ45 end are:
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
With that same orientation (contacts facing up and towards me, clip facing away), here are the RJ11 contacts.
Orange/White
Blue
Green/White
Orange
Blue/White
Brown
Good luck!
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question