Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
radiant pos in on but the screen is black??!!!
- Thread starter 1q2w3e4r5
- Start date
If it's a 1220 - Either memory or back light.
Try this first,
try removing the memory. Turn machine on, leave sit for 5 min+. Turn machine off - replace memory and try again. Let it sit for at least 15 min booting. You may need to have the memory replaced. Or it could be the back light controller.
Cheers,
Coorsman
Try this first,
try removing the memory. Turn machine on, leave sit for 5 min+. Turn machine off - replace memory and try again. Let it sit for at least 15 min booting. You may need to have the memory replaced. Or it could be the back light controller.
Cheers,
Coorsman
- Thread starter
- #3
- Status
Similar threads
