Radiant P1220 hang on boot

[mixerjv]

Two of my Radaint P1220's I picked up used are now hanging on initial boot after the Radiant screen comes up with Bios version and it says Please Wait...

Both had booted fine before.

One has the problem after I updated bios to .46, one has the problem even though I've done nothing to it.

I tried removing hard drives and put in a swapped power supplies with known good units, no avail.

Any ideas?

 

[mixerjv]

Slight correction to my above post, it does not get to the please wait, it's stopping at the ver #.

Thanks

 

[AlohaRoss]

Put a keyboard on them, and as they post, press the ESC key. You will then be able to see what if anything is going on. I know if you upgrade memory, they take a much longer time to boot the first time. If you are still having issues see if the person you bought them from will swap them for you. I have a large stash of them if you want to replace them.

AlohaRoss

http://www.needalohahelp.com