Radiant P1220 Beeps on Boot

[frozentax]

I have a couple of P1220 terminals that, when powered on, beep several times and won't POST. Green power light does come on. Any suggestions? I'm not too familiar with this hardware.

One terminal was actually on and functional. It was powered down properly then, when powered back on, exhibited the beeping issue.


Thanks for the help!

 

[wyalin]

depend how is the beep pattern. you can search it over internet for cmos post beep.
might be the memory

 

[coorsman]

Pull the memory out and re-seat.


Cheers,
Coorsman

 

[frozentax]

Thanks for the replies!

I was getting a 1-3-3-1 beep pattern and a 1-1-1-1 short beep pattern. I looked up the Pheonix POST codes but the explanations didn't really line up with what I thought to be the case.

I did re-seat the memory in bank one with no resolution. However, seating the memory in bank two allowed the terminals to boot with no issue!