RAD access via the internet

[desertinn]

does anyone know of a way that would allow access to a RAD via the internet.

For example instead of dialing up which requires a modem and land line. I would log onto a site that would allow me to then call a Nortel system via the site and manage the customers MICS that way.

So it is internet site then back to analog which calls the MICS RAD this way wasier access to clinets systems without having to be at my office to do this.

I don't ifI am explainig myself very well.

 

[BASpatha]

You can collect a PC to the RAD via a RS232 cable. Load the NRU Management Software on the connected PC and then use Remote Desktop to access that PC.
The link below is for the FASTRAD Setup & Install Guide

http://support.avaya.com/css/P8/documents/100102093