Can't find non-specific server hardware forum, so here goes..
I have a 1U rackmount server chassis by Gigabyte which has a daughterboard for connecting IDE drives, these drives have fixed sliding plates which put the rear of the disk directly onto fixed IDE and Power connectors. The system was pre-built with two maxtor disks, of which both have now failed.
The problem is that no existing disk that I can find will fit onto the fixed IDE/Power ports, they're all very slightly mis-aligned by a few mm, including the maxtor drives which succeed the original ones used in the machine.
The Chassis is a Gigabyte GS-SR114. Does anybody have experience of this chassis and successfully found disks to fit it?
Thanks all.
I have a 1U rackmount server chassis by Gigabyte which has a daughterboard for connecting IDE drives, these drives have fixed sliding plates which put the rear of the disk directly onto fixed IDE and Power connectors. The system was pre-built with two maxtor disks, of which both have now failed.
The problem is that no existing disk that I can find will fit onto the fixed IDE/Power ports, they're all very slightly mis-aligned by a few mm, including the maxtor drives which succeed the original ones used in the machine.
The Chassis is a Gigabyte GS-SR114. Does anybody have experience of this chassis and successfully found disks to fit it?
Thanks all.