Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

R4 IP dect

Status
Not open for further replies.

DeanStaunton

Technical User
Sep 23, 2015
14
GB
I have a IP500v2(10.1) and one 4Ch base station(v7p2p28.bin) can make 4 simultaneous than after a week or so the calls start cut off or can only make one call reset the base station system fine
 
So:

You have an IPO500V2 release 10.1?

You have one IP Dect base station?

Then, you can make 4 simultaneous calls for one week, and after that week the call cuts off? Now most of my customers doesn't make a call for one week. But okay...

And then you can only make one call and need to reset basestation?

Well, tnx for the info, but what is the question?


 
sorry about
when making the second dect call, the call cut off it seem as if the base station has only one ch.
 
So you are only able to make one call at the same time?

 
If this happens does the lamp on the base station flashes red when one channel is in use??
We had the same issue with a R4 compact dect base and we replaced it with a 8 channel base station. It happened on all sofware versions.
Problem solved.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top