"Resources Unavailable" on Display

[firstlastcase]

Hi all

I have installed a new S8300/G700 system with about 60 4602sw and 5 4620sw phones and CM4.

the system works ok .. but suddenly when i press the speaker button on the phone it gives no dial tone and the display says: [COLOR=red yellow]"Resources Unavailable"[/color]

also when i try to connect to the System using ASA (making a SAT session)on any computer on the network .. it does not always connect directly ... i have to try more than once ..
and when it is connected .. if i leave it for about 2 min. it disconnects me.

what can i do .. where can i start?

Thanks for any post.



Abdullah Ali

 

[big70]

Look at your voip module.....

Ip-adress
subnet
gateway

 

[firstlastcase]

where is that dear?


Abdullah Ali

 

[rlance610]

I would also check the speed and duplex setting on the network switch and the ports in the G700.