Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Resources Unavailable" on Display

Status
Not open for further replies.

firstlastcase

IS-IT--Management
Aug 30, 2006
16
JO
Hi all

I have installed a new S8300/G700 system with about 60 4602sw and 5 4620sw phones and CM4.

the system works ok .. but suddenly when i press the speaker button on the phone it gives no dial tone and the display says: [COLOR=red yellow]"Resources Unavailable"[/color]

also when i try to connect to the System using ASA (making a SAT session)on any computer on the network .. it does not always connect directly ... i have to try more than once ..
and when it is connected .. if i leave it for about 2 min. it disconnects me.

what can i do .. where can i start?

Thanks for any post.



Abdullah Ali
 
Look at your voip module.....

Ip-adress
subnet
gateway
 
I would also check the speed and duplex setting on the network switch and the ports in the G700.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top