Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Relaying denied" error for new Accepted Domain

Status
Not open for further replies.

knappagh1

Technical User
Sep 16, 2004
82
0
0
GB
Hi,

We have a single Exchange 2007 server where I have recently created a new accepted domain, complete with email address policy but external emails are bouncing back (see below). I can send internal emails OK.

I followed the instructions found here:

Is there anything else i have should have done that is not mentioned in the article?

Any help is appreciated.

Thanks,
Patrick.


Delivery to the following recipient failed permanently:

tbc.test1@taxiandbusconversions.co.uk

Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 Relaying denied to taxiandbusconversions.co.uk (state 14).

----- Original message -----

MIME-Version: 1.0
Received: by 10.213.102.65 with SMTP id f1mr4309788ebo.61.1259943166460; Fri,
04 Dec 2009 08:12:46 -0800 (PST)
Date: Fri, 4 Dec 2009 16:12:46 +0000
Message-ID: <955551af0912040812k27065e9ewf8857bfda8bf013a@mail.gmail.com>
Subject:
From: knappagh1 <knappagh1@gmail.com>
To: tbc.test1@taxiandbusconversions.co.uk
Content-Type: multipart/alternative; boundary=00504502d0d1dfc4e30479e960f0
 
Hi Pat,

I'm only getting looking again at this today.

I have checked and im able to send messages fine on port 25. Is there anything else i should check?
 
Hi Pat,

I jumped the gun a little there. When i connect, i can send emails internaly, but i cannot send to external domains. I get the following error message:

550 5.7.1 unable to relay.
 
I have since figured out that there was an AntiSpam firewall on another server. Once i added the new domain there, we were able to receive emails ok.

Thanks for the help.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top