Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

"Meet me conference" with V VAL?

Status
Not open for further replies.

ATI2ner

Technical User
Jan 15, 2007
119
0
0
US
Can someone point me to documentation I can give to an end user on how to set this up? I have been told it is possible, but documentation is lacking.

We have a G650 with CM 5.1 with a G450LSP.

Thanks for anything you can do!
 
I do not have any Avaya Docs but I can send you my setup.
I believe it's pretty straight forward.
Good Luck

Here is the VDN
Name: Meet-Me-Conference
Vector Number: 150

Meet-me Conferencing? y

COR: 6
TN: 1
MEET-ME CONFERENCE PARAMETERS:

Conference Access Code: 123456 (-must assign 6 digit code for participate)
Conference Controller:
Conference Type: 6-party
Var Description Assignment
V1
V2
V3
V4
V5


VDN Time-Zone Offset + 00:00
Daylight Savings Rule: system



PBX Programming

Number: 150 Name: S_Conf_FCC
Multimedia? n Meet-me Conf? y Lock? y
Basic? y EAS? y G3V4 Enhanced? y ANI/II-Digits? y ASAI Routing? n
Prompting? y LAI? y G3V4 Adv Route? y CINFO? y BSR? y Holidays? n
Variables? y 3.0 Enhanced? y
01 collect 4 digits after announcement 5861 - (Thank you for Calling ABC Conference Line)
02 goto step 11 if digits = 3224 - (Hidden Moderator Code needs to be entered 3224)
03 collect 6 digits after announcement 5854 - (please enter your access code now)
04 goto step 8 if digits = meet-me-access - (123456)
05 collect 6 digits after announcement 5855
06 goto step 8 if digits = meet-me-access - (123456)
07 disconnect after announcement 5856 - (The Access code is invalid)
08 goto step 18 if meet-me-idle
09 goto step 16 if meet-me-full
10 announcement 5859 (Your Conference call is already in progress)
12 stop
13 announcement 5857 - (You are the first party to join the call)
14 route-to meetme
15 stop
16 disconnect after announcement 5858 - (This conference if full)
17 stop
18 announcement 5862 - (Please continue to hold until the Moderator arrives)
19 wait-time 10 secs hearing music
20 goto step 19 if meet-me-idle
21 goto step 14 if unconditionally
22 stop
 
PBXKID,

Sorry to piggy back on the post, but it looked interesting... Just curious, what is the announcement in step 5 used for? Is that the announcement that has them re-enter conference number?
[ThumbsUp]

“Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for.”

- Epicurus
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top