Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

"just pick up the phone!"

Status
Not open for further replies.

GUIsareapassingfad

IS-IT--Management
Feb 5, 2016
116
US
Hello
I have 3 lines appearing on 3 different phones 1498 1499 1465. the three phones are 2616. Each of the phones has its main line at key 0, but also has the 2 other lines at different keys on the phone as well, so anyone can be at any phone and pick up the correct line.
BUT
When 1498 rings on the 1499 phone, I have to press the key for 1498 to get the call. How do I set it up so all I have to do is just pick up the phone? do I need to make all 3 iterations of all 3 numbers either MCR or MCN? or is this something completely different?

Thank you



Nortel Meridian1
Version 2511
Release 25
Issue 8
 
You should really post your query on the Meridian 1 forum at
Can you print off all 3 TN's and post the details please?. You need to check that all 3 phones are configured in the same way with MCR/MCN or SCR/SCN etc.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support


 
MCR or SCR. The R means ring, the N means No Ring.

Marv ccna
telemarvlogosmall.gif

Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
 
sorry about the mispost. will repeat the thread over at meridian.
I cant print the settings because we are still using a green screen terminal
BUT
when I try and change one phone from SCR to MCR, I get the error that I cant change it.
Do I have to nul all the phones then re assign them?

Nortel Meridian1
Version 2511
Release 25
Issue 8
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top