Sorry for posting this here - if the mods can tell me the correct forum, that'd be great. The error in principle is the same to a lot of other issues though.
I have an Adaptec 29160 SCSI Card - the SCSI device at the other end is a Canon DR5080C Scanner
It worked fine until some of the pins on the SCSI cable got damaged and I replaced the cable.
Now when the pc boots and I select the SCSI utility, I get the following error:
"Attention ! Insufficient termination detected on the LVD/SE connectors"
The cable is secure at both ends.
I never had to modify the SCSI termination bus to get the scanner working previously.
The OS is W2K
Any ideas?
Thanks...
I have an Adaptec 29160 SCSI Card - the SCSI device at the other end is a Canon DR5080C Scanner
It worked fine until some of the pins on the SCSI cable got damaged and I replaced the cable.
Now when the pc boots and I select the SCSI utility, I get the following error:
"Attention ! Insufficient termination detected on the LVD/SE connectors"
The cable is secure at both ends.
I never had to modify the SCSI termination bus to get the scanner working previously.
The OS is W2K
Any ideas?
Thanks...