Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

quick dial pause programming

Status
Not open for further replies.

Mitel4432

Technical User
Sep 23, 2008
15
0
0
GB
Hi, Does anybody know if you can program a pause into a quick dial code, I found some info in help about using certain buttons while dialling thro device, but no code mentioned.
System Mitel 3300mxe with 5212 & 5330 devices.
 
I'm pretty sure you press the hold key while entering the number.

The duration of the pause is defined in system options

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
Thanks kwbMitel, I believe that applies to dialling thro device, I wish to program a quick dial key on a users phone with a number that contains a pause.
 
You can programme a system speed call number with a pause

Example speed call number 4999 Actaul Number 4800P#XXXX

We use this to drop calls directly into a user vm
 
Mitel4432

Read your original post, you specifically ask for a code associated with dialing thru the divice.

There is no mention of programming thru Web interface.
(The P is used on the Web interface)

you get what you ask for.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
kwbMitel Apologies, original post was worded a bit hazy

MitelMaintel I was hoping that you could program a user speedcall or a CDE speedcall to do the same thing, I have PA's that have programmed their old digital phones to call voicemail and drop passcode on end to take them straight into the voicemailbox, I haven't played with system speedcall's yet so will give it a try

Thanks to all
 
I think I understand what you are trying to do

Example Speed call number #4777 Actual Number 4800P1111

#4777= There extension with # infront of it

4800=Voicemail Hunt Group

P = Pause

1111=There passcode

Then Programme a CDE Key on there phone for #4777

This would drop into there voicemail without entering a passcode
 
I think kwbmitel has PMS, and I don't mean Property Management System.

I agree with kwbmitel, some of the questions are worded poorly.
 
Thanks MitelMaintel have programed and tested as per your method, works a treat.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top