Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Queue Depth & Winderz
- Thread starter Breslau
- Start date
hi breslau,
it depends on which hba you used, for instance on emulex, you can set the queuedepth using elxcfg (in scsi mini port), see
hope it can help you.
Chris
it depends on which hba you used, for instance on emulex, you can set the queuedepth using elxcfg (in scsi mini port), see
hope it can help you.
Chris
- Thread starter
- #3
Are you using the SANSurfer software on the server? If not you will need to reboot the server and hit "Alt +Q" when it prompts you. You will then need to go into the settings of the HBA NVRAM and change it from there.
- Status