Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Question - Ringing Multiple Phones

Status
Not open for further replies.

terrysdavid

Programmer
Jun 6, 2006
350
TT
Hi all,
I have a quick question regarding a feature on the CS1000E Rls 7.5. We have a location that has a CS1000E Rls 7.5. There are potential hazards at the location based on the nature of their operations. In the event that they have to evacuate 100 employees or so, is there a way in which their IP phones can all ring at the same time and someone can give a short message to evacuate? Or is this not possible?

Best regards
Terry
 
Not possible that I know of. Your best bet is an overhead paging system.
 
They used to make an Application Server that would allow paging through the speakers of the IP phones, but that has been discontinued because it was a POS. There may be a 3rd party system out there that will do it but most of those 3rd party Applications are SIP based, not Unistim.
 
We are installing the Avaya option. PROGRESSION SERVER:VOICE PAGING WITH PRE-RECORDED AND ADHOC LICENSES (this solution is pricey). Another option is to check out valcom, they have several solutions that many work for you. Check out
 
We use the Valcoms for in phone paging. Works great. You would need 3 of them to cover 100+ phones but its a simple configuration.

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top