Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Question about VCM

Status
Not open for further replies.

Infotel

Programmer
Nov 18, 2014
46
0
0
CA
Hi everybody

I have a question about VCM Logical.

Someone know if we need to install the VCM32 in the slot one before the combo card if we want the system use the VCM channel from the VCM card first ?

That made a couple of installation i see the VCM32 card in slot 4 or 3 after one or 2 combo card ?

I think the system use the card from 1 to 4 so... ???

I have looking in the documentation but i see nothing about that and the system status don't show witch card use the VCM channel in a call.

Thank for the follow up !
 
You don't have a choice. They're taken from the general pool, like having all trunks in trunk group id 10.
By preference I would stick the VCM card in slot 4. If it's an ATM combo card, stick it in slot 3 to be sure you don't encounter the backplane clicking problem.

If you must use the VCM card only for VCM, use a DS8 instead of a combo

Did you know?
If they name the hurricane after you, you have to pay for the damage.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top