Quad BRI module in a 3300cxi

[zete]

I have a 3300 running 9.0.3.15 in the Netherlands. In the module assignment form it shows a quad bri in 3-1-2-1 and 3-1-3-1.
There are 6 bri channels programmed. The plids are 3-1-2-1, 3-1-2-2,3-1-2-3,and 3-1-2-4. Also 2 more trunks are programmed in 3-1-3-1 and 3-1-3-2 and 3-1-3-3 and 3-1-3-4 are vacant.
In programming a quad BRI module There can only be 4B channels and I do not know what plid addresses I should be using. Can anyone help with this?

 

[Mitel_specialist]

You should check the Digital link assignment and your Digital trunk assignment. The plid's should be 3-1-2-1 to 3-1-2-4 and 3-1-3-1 to 3-1-3-4. At the Digital trunk assignment you must fill in the right amount of trunk numbers.( 1 to 8)