QSIG trunk

[HuweyII]

I've got a T1 going between my Avaya Definity and a Cisco CME switch. I've noticed that when some stations call a Cisco extension the cisco shows just the extension. When some other stations call a cisco extension the cisco phone says "Private"

Anyone have any idea where I'd look to fix the "Private" issue so that at least the extension shows? I've checked the COR on the calling station that didn't seem to be it.

Also anyone know how to have the Definity send the caller name info as well as the calling extension?

QSIG is enabled:
QSIG OPTIONAL FEATURES

Basic Call Setup? y
Basic Supplementary Services? y
Centralized Attendant? n
Interworking with DCS? n
Supplementary Services with Rerouting? y
Transfer into QSIG Voice Mail? y
Value-Added (VALU)? y

 

[CBB]

Check page 3 of the trunk form.

Send Name: y

 

[HuweyII]

I did check that "Send Name" field and it is set to yes. Here is how the trunk is setup:

display trunk-group 5 Page 1 of 10 SPE A
TRUNK GROUP

Group Number: 5 Group Type: isdn CDR Reports: y
Group Name: T1 to VoiceGW1 COR: 89 TN: 1 TAC: 8
Direction: two-way Outgoing Display? y Carrier Medium: PRI/BRI
Dial Access? y Busy Threshold: 99 Night Service:
Queue Length: 0
Service Type: tie Auth Code? n TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 0 Codeset to Send National IEs: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: b Digit Handling (in/out): enbloc/enbloc

Trunk Hunt: descend QSIG Value-Added? y
Digital Loss Group: 13
Calling Number - Delete: Insert: Numbering Format: unk-unk
Bit Rate: 1200 Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0


display trunk-group 5 Page 2 of 10 SPE A
TRUNK FEATURES
ACA Assignment? n Measured: both Wideband Support? n
Internal Alert? n Maintenance Tests? y
Data Restriction? n NCA-TSC Trunk Member: 1
Send Name: y Send Calling Number: y
Used for DCS? n Hop Dgt? y
Suppress # Outpulsing? n Numbering Format: unknown
Outgoing Channel ID Encoding: preferred UUI IE Treatment: service-provider

Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Send Called/Busy/Connected Number: y


Send UCID? y
Send Codeset 6/7 LAI IE? y Ds1 Echo Cancellation? n

Path Replacement with Retention? n
Path Replacement Method: better-route
Network (Japan) Needs Connect Before Disconnect? n