Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
QSIG tie-line between 2 MD110 with ITG1,ITG2 and LAN.
- Thread starter MDsup
- Start date
Hi MDsup
try these settings for MD110 to MD110 Qsig
ROCAI:ROU=X,SIG=111100000031,BCAP=11111,TRAF=00151511,SERV=2110030000,SEL=013000000000,TRM=5;
(A END)
RODAI:ROU=X,TYPE=SL60,VARC=00000310,VARI=05400000,VARO=02200000;
(B END)
RODAI:ROU=X,TYPE=SL60,VARC=00000310,VARI=05400000,VARO=02000000;
the difference being bit 3 of VARO which is priority of call collision.
RODDI
EST=X,SRT=1,ROU=X,ADC=05051000000000250;
bit 5 of ADC value being set to 1 is the critical part for name display and other ISDN functionality.
hope it is of some use
try these settings for MD110 to MD110 Qsig
ROCAI:ROU=X,SIG=111100000031,BCAP=11111,TRAF=00151511,SERV=2110030000,SEL=013000000000,TRM=5;
(A END)
RODAI:ROU=X,TYPE=SL60,VARC=00000310,VARI=05400000,VARO=02200000;
(B END)
RODAI:ROU=X,TYPE=SL60,VARC=00000310,VARI=05400000,VARO=02000000;
the difference being bit 3 of VARO which is priority of call collision.
RODDI
EST=X,SRT=1,ROU=X,ADC=05051000000000250;bit 5 of ADC value being set to 1 is the critical part for name display and other ISDN functionality.
hope it is of some use
- Thread starter
- #3
- Status
