Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Qsig MWIs from 3rd party voicemail to NT PBX issues 1

Status
Not open for further replies.

3000gt

IS-IT--Management
Apr 26, 2002
131
US
We have configured an Option 11c with 25.40 sw and all the Qsig and NMS options enabled on it, according to Cisco's Callmanager to Nortel Qsig integration guide.

We are having trouble getting MWI's to go from the third party voicemail to the PBX using the Qsig T1. However, we can make calls, as well as get CPND/CPID.

WE have the QMWI option set in RCAP and it still doesn't work. Has anyone gotten this setup to work correctly with MWIs?

We would also like to get call transfers to work on the Qsig T1 as well.

thanks,

Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs
 
i have mwi working perfect to a ccm, and if you search this forum for for rolm qsig you'll see the post. lost a second mwi for second lines when i went to call pilot, but will get it back with rls 3, we share a lot of background, i don't play avaya, but rolm was my primary money maker for a decade. when simmons bought them out i concertrated on the 81, decent money for an easy switch.. back to the point, qmwi is the only prompt you should need.. check ld 96 stat serv and enable serv msgs to the ccm. my intergration is perfect, names, dn;s etc.. what 3rd party mail. i have built a intergration back to the old rolm phone mail and did get all the features but that was rls 21 or so.

john poole
bellsouth business
columbia,sc
 
Thanks for you're information Jpoole, we have been working on this setup for weeks. We still don't have MWIs working correctly.

Would you be able to post or direct us to a list of you're software packages on you're switch? We have to use an Opt11c for this, though you are iusing an 81, I would like to garner that the sw packages are the same. I had seen that on the cisco integration notes for NT Qsig, they say the switch needs minimum 25.40 sw as well.

Expertise in Avaya, Rolm/Siemens, Mitel, Nortel, NEC, Alcatel, Toshiba, Aspect, Ericsson, Executone, Panasonic PBXs & KSUs
 
not at work this week so i can't post pkgs, here's my config back to a cisco with msg lamps. i do know we didn't request additional packages when we upgraded to rls 3.0

Route:


REQ: prt
TYPE: rdb
CUST 0
ROUT 100

Code:
TYPE RDB
CUST 00
ROUT 100
DES  CISCO LOCAL
TKTP TIE
NPID_TBL_NUM   0
ESN  NO
CNVT NO
SAT  NO
RCLS EXT
VTRK NO
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
    MODE PRA
    IFC  ISGF
    SBN  NO
    PNI  00000
    NCNA NO
    NCRD NO
    CHTY BCH
    CTYP UKWN
    INAC NO
    ISAR NO
    CPFXS YES
    DAPC NO
    INTC NO
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH RRB
TRMB YES
STEP
ACOD 8760
TCPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC  NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
ICIS YES
TIMR ICF  512
     OGF  512
     EOD  13952
     NRD  10112
     DDL  70
     ODT  4096
     RGV  640
     GRD  896
     SFB  3
     NBS  2048
     NBL  4096
     IENB  5
     TFD  0
     VSS  0
     VGD  6
DRNG NO
CDR  NO
VRAT NO
MUS  YES
MRT  10
RACD NO
FRL  0 0
FRL  1 0
FRL  2 0
FRL  3 0
FRL  4 0
FRL  5 0
FRL  6 0
FRL  7 0
OHQ  NO
OHQT 00
CBQ  NO
AUTH NO
TDET NO
TTBL 0
ATAN NO
PLEV 2
ALRM NO
ART  0
SGRP 0
AACR NO
Trunk:


Code:
DES  CISCO LOCAL
TN   100 01
TYPE TIE
CDEN SD
CUST 0
TRK  PRI
PDCA 1
PCML MU
NCOS 1
RTMB 100 1
B-CHANNEL SIGNALING
TGAR 1
AST  NO
IAPG 0
CLS  CTD DTN WTA LPR APN THFD HKD
     P10 VNL
TKID
FCAR NO
DATE 24 FEB 2005
[COLOR=red]Dch:[/color]
Code:
ADAN     DCH 100
  CTYP MSDL
  GRP  0
  DNUM 13
  PORT 0
  DES  Cisco
  USR  PRI
  DCHL 0
  OTBF 32
  PARM RS422  DTE
  DRAT 64KC
  CLOK EXT
  IFC  ISGF
    PINX_CUST 0
    ISDN_MCNT 300
  CLID OPT0
  CO_TYPE  STD
  SIDE USR
  CNEG 1
  RLS  ID  **
  [bold]RCAP COLP NDI CCBI CCNI PRI DV3I CTI  QMWI [/bold]
  PR_TRIGS DIV 2 3
           CNG 2 3
  PR_RTN NO
  MBGA NO
  OVLR YES
  DIDD 0
  OVLS NO
  T310 120
  T200 3
  T203 10
  N200 3
  N201 260
  K    7

qmwi turned in msg lamps, if no one else at the office sees this post i will post them next week, hopefully you will not need them be them. i assume you've enl msgi x on the d in ld 96 to see if your getting lamp msgs? and stat serv, might need to turn them up. another problem is changes on the d do not take effect without enl mdsl x fdl in 96. we are spoiled to changed being dynamic, that sometimes when a chg doesn't fix a problem we remove the cure without downloading it pre-test

john poole
bellsouth business
columbia,sc
 
I am in the same switch as John Poole, here are the packages

>ld 22
REQ prt
TYPE pkg
OPTF 1
CUST 2
CDR 4
CTY 5
RAN 7
TAD 8
DNDI 9
EES 10
INTR 11
ANI 12
ANIR 13
BRTE 14
RPE1.5 15
DNDG 16
MSB 17
SS25 18
DDSP 19
ODAS 20
DI 21
DISA 22
CHG 23
CAB 24
BAUT 25
CASM 26
CASR 27
BQUE 28
NTRF 29
NCOS 32
CPRK 33
SSC 34
IMS 35
UST 35
UMG 35
ROA 36
NSIG 37
MCBQ 38
NSC 39
BACD 40
ACDB 41
ACDC 42
LMAN 43
MUS 44
ACDA 45
MWC 46
AAB 47
GRP 48
NFCR 49
ACDD 50
LNK 51
FCA 52
SR 53
AA 54
HIST 55
AOP 56
BARS 57
NARS 58
CDP 59
PQUE 60
FCBQ 61



PAGE 001

OHQ 62
NAUT 63
SNR 64
TDET 65
NXFR 67
HOT 70
DHLD 71
LSEL 72
SS5 73
DRNG 74
PBXI 75
DLDN 76
CSL 77
OOD 79
SCI 80
CCOS 81
CDRQ 83
TENS 86
FTDS 87
DSET 88
TSET 89
LNR 90
DLT2 91
PXLT 92
SUPV 93
CPND 95
DNIS 98
BGD 99
RMS 100
MR 101
AWU 102
PMSI 103
LLC 105
MCT 107
ICDR 108
APL 109
TVS 110
TOF 111
IDC 113
AUXS 114
DCP 115
PAGT 116
CBC 117
CCDR 118
EMUS 119
PLDN 120
SCMP 121
FTC 125
BKI 127
DTI2 129
TBAR 132
ENS 133
FFC 139
DCON 140
MPO 141
ISDN 145
PRA 146
ISL 147
NTWK 148
IEC 149
DNXP 150



PAGE 002

CDRE 151
FXS 152
IAP3P 153
PRI2 154
ACNT 155
THF 157
FGD 158
NAS 159
FNP 160
ISDN_INTL_SUP 161
SAR 162
MINT 163
LAPW 164
GPRI 167
ARIE 170
CPGS 172
ECCS 173
AAA 174
NMS 175
EOVF 178
HVS 179
DKS 180
SACP 181
VNS 183
OVLP 184
EDRG 185
POVR 186
SECL 191
ORC-RVQ 192
IPRA 202
XPE 203
XCT0 204
XCT1 205
MLWU 206
NACD 207
HSE 208
MLM 209
MAID 210
VAWU 212
EAR 214
ECT 215
BRI 216
IVR 218
MWI 219
MSDL 222
FC68 223
M911 224
CWNT 225
MSDL SDI 227
MSDL STA 228
SSAU 229
BRIT 233
FCDR 234
BRIL 235
MCMO 240
MULTI_USER 242
ALRM_FILTER 243
SYS_MSG_LKUP 245
VMBA 246
CALL_ID 247
M911 ENH 249



PAGE 003

DPNA 250
SCDR 251
ARFW 253
PHTN 254
ADMINSET 256
ATX 258
CDRX 259
QSIG 263
REM_IPE 286
NI-2 291
MAT 296
MQA 297
CORENET 299
CPP 301
QSIGGF 305
CPRKNET 306
PAGENET 307
CPCI 310
NGCC 311
TATO 312
OPEN_ALARM 315
QSIG-SS 316
QTN 321
NGEN 324
RANBRD 327
MUSBRD 328
ESA 329
ESA_SUPP 330
ESA_CLMP 331
CNUMB 332
CNAME 333
NI-2_CBC 334
MEET 348
MC32 350
DBA 351
FDID 362
NMCE 364
STS_MSG 380
CDIR 381
VIRTUAL_OFFICE 382
ATAN 384
NI2NAME 385
M3900_PROD_ENH 386
VIR_OFF_ENH 387
ACDE 388
UUI 393
OAS 394
ICON 397
PCA 398
H323_VTRK 399
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top