Hi,
I am looking to configure QoS on my network with multiple subnets. I have a PP8600 at the core and BPS/450 stacks in all of the closets. I am looking to give a particular subnet (IP Telephony) QoS. Easy enough to do on the Passport but not so on the BPS stacks. I know I must use the web interface and have configured it using the QoS wizard as I think it should be. The problem is I cannot verify the settings after it is implemented like on the Passport. On the Passport I know that I can go to the advanced tab under Vlans and see that the vlan is set to level 6 (Premium). Anyone know how I can verify the settings on the BPS's?
Thanks for the help.
Duane
I am looking to configure QoS on my network with multiple subnets. I have a PP8600 at the core and BPS/450 stacks in all of the closets. I am looking to give a particular subnet (IP Telephony) QoS. Easy enough to do on the Passport but not so on the BPS stacks. I know I must use the web interface and have configured it using the QoS wizard as I think it should be. The problem is I cannot verify the settings after it is implemented like on the Passport. On the Passport I know that I can go to the advanced tab under Vlans and see that the vlan is set to level 6 (Premium). Anyone know how I can verify the settings on the BPS's?
Thanks for the help.
Duane