QOS Parameters

[techguy09]

Wondering if someone could help me?

We currently have a application running on our system and the software manufacturers have asked me for the QOS settings of your Cisco Switch.

I am not sure how to check the current setting. I am using a Catalyst 4600 Release 12.2(20)

Thanks.

Email for Manufacturers:

In the mean time we would like to get some insight on how QOS is parametered on your network currently?

 

[Zen37]

Sh policy-map" i think

 

[buraglio]

I don't beieve there is any Class or quality of service on by default. Also, I think a cisco 4600 is a content distribution device, not a catalyst switch (I could be wrong). Did you mean catalyst 4500? If so, some parameters are Sup dependent. The default is off. Showing command also depends on if you're running in native IOS or CatOS on teh 4500.

----------------------------------------
Nicholas D. Buraglio

http://www.buraglio.com/nick/gpg-pub-key.txt

 

[techguy09]

The switch is a Catalyst 4006.

As mentioned above I understand that the QOS settings are turned off by default.

 

[vlf]

sh mls qos