Hi,
I have a Catalyst 4500 chassis with some older cards, Supervisor IV (WS-4515) and the 18-port GBIC cards (WS-X4418-GB).
I am used in configuring QoS on Metro 34xx and 36xx series of switches, and are not getting it to work really.
My situation is like this:
4500 is running as Layer 2 device. Getting vlan for management, streaming media, voip and internet in on an uplink port. They do have a COS value set. On the other end I have access ports connecting to a smaller CPE device. In the CPE device, I have 3 queues, sorting the COS values into each queue.
How do I achieve a working configuration in the 4500?
Greetings
Chris
I have a Catalyst 4500 chassis with some older cards, Supervisor IV (WS-4515) and the 18-port GBIC cards (WS-X4418-GB).
I am used in configuring QoS on Metro 34xx and 36xx series of switches, and are not getting it to work really.
My situation is like this:
4500 is running as Layer 2 device. Getting vlan for management, streaming media, voip and internet in on an uplink port. They do have a COS value set. On the other end I have access ports connecting to a smaller CPE device. In the CPE device, I have 3 queues, sorting the COS values into each queue.
How do I achieve a working configuration in the 4500?
Greetings
Chris